Congratulations on your purchase of The Atlas Store’s 300A Atlas air purifier! You have just taken the first step to enjoying the cleanest air possible for you and your household. There is no going back to the world of dirty air after this, so prepare yourselves. Today we will go through how to properly use your new purchase as well as any tips and tricks to keep it running optimally.

When you first open up the packaging, you should have the air purifier unit itself, a bag containing the power cord, a small box containing the ozone plates, and an instructions manual. Take the air purifier out of the packaging and set it down near a power outlet. Remove the power cord from its packaging and plug it into the air purifier. Open up the box with the ozone plates and insert one ozone plate into each slot on the back of the air purifier unit. Finally, plug your air purifier into the outlet and you are done setting it up. It really is that easy.

We advise you to not use your air purifier while people are in the house because people have varying reactions to the effects of ozone. However, if you do decide to run it while people are home, run it on low first to gauge how you are affected by ozone. Running it on low is enough to purify your home or work space so do not worry about not being able to run it on a higher setting with people around. If you are too sensitive to it being run on low, run it with no oxygen and only the ionizer on when people are in the house. We recommend running your air purifier at low setting first even if there is no one home and adjusting based on those results.

Regular maintenance of your air purifier is necessary to ensure optimal performance. Every month you need to clean the ozone plates. Make sure your Atlas 300A Air Purifier is turned off before slowly and carefully removing the two ozone plates from the back. Dampen a towel with water soap. Wring off any excessive water before wiping down the ozone plates. Be careful not to break any of the wires on the ozone plate. Completely dry off the ozone plates with another towel before inserting them back into the unit. We recommend replacing your ozone plates every 6 months to 2 years depending on how often you use your air purifier. If you run your air purifier often and at high settings, you will need to replace your ozone plates after 6 months. If you run it sparingly at low settings, your plates will be good for about 2 years.

If you have any further questions or need any further help, please do not hesitate to visit The Atlas Store or to give us a phone call at (888) 612 – 8527 or (888) 61- ATLAS.